Pressure Gauge

Alat Ukur Tekanan Gas- Pressure Gauge Series 2003Differential pressure gage, range 0-3.0" w.c., minor divisions .10.Series 2000 Magnehelic® Differential Pressure Gage Indicate Positive, Negative or Differential, Accurate within 2% 

Alat Ukur Tekanan Gas-Magnehelic Differential Pressure Gage - Series 2015Differential pressure gage, range 0-15" w.c., minor divisions .50.Series 2000 Magnehelic® Differential Pressure Gage Indicate Positive, Negative or Differential, Accurate within 2%Specification:Service: Air and non-combustible, compatible gases. (Natural Gas option available.)Wetted Materials: Consult factory.Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.Accuracy: ±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).Pressure Limits: -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.Weight: 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g). 

Alat Ukur Tekanan Gas-Magnehelic Differential Pressure Gage - Series 2010Differential pressure gage, range 0-10" w.c., minor divisions .20.Series 2000 Magnehelic® Differential Pressure Gage Indicate Positive, Negative or Differential, Accurate within 2% 

Alat Ukur Tekanan Gas-Magnehelic Differential Pressure Gage - Series 2000-1.5KPADifferential pressure gage, range 0-1.5 kPa, minor divisions .05.Series 2000 Magnehelic® Differential Pressure Gage Indicate Positive, Negative or Differential, Accurate within 2%Specification:Service: Air and non-combustible, compatible gases. (Natural Gas option available.)Wetted Materials: Consult factory.Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.Accuracy: ±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).Pressure Limits: -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.Weight: 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).

Alat Ukur Tekanan Gas-Magnehelic Differential Pressure Gage - Series 2000-15CMDifferential pressure gage, range 0-15 cm w.c., minor divisions .50.Specification:Service: Air and non-combustible, compatible gases. (Natural Gas option available.)Wetted Materials: Consult factory.Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.Accuracy: ±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).Pressure Limits: -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.Weight: 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).

Alat Ukur Tekanan Gas-DH3-004: Differential Pressure Controller, range 0-1" w.c.Specifications:Service:  Air and non-combustible, compatible gases.Wetted Materials: Consult factory.Housing Material: Die cast aluminum case and bezel.Accuracy: ±1.5% for 0.25" and ±0.25" w.c. ranges. Ranges 0.5" to 5" w.c. and corresponding bi-directional (except ±2.5" w.c.) ±1%; All other ranges: ±0.5% @ 77°F (25°C) including hysteresis and repeatability (after 1 hour warm-up).Stability: < ±1% per year.Pressure Limits: Ranges ≤ 2.5 in w.c.: 25 psi; ±2.5", 5 in w.c.: 5 psi; 10 in w.c.: 5 psi; 25 in w.c.: 5 psi; 50 in w.c.: 5 psi; 100 in w.c.: 9 psi.Temperature Limits: 32 to 140°F (0 to 60°C).Compensated Temperature Limits: 32 to 140°F (0 to 60°C).Thermal Effects: 0.020%/°F (0.036/°C) from 77°F (25°C). For 0.25" and ±0.25" w.c. ranges: ±0.03%/°F (±0.054%/°C).Power Requirements: 12-28 VDC, 12-28 VAC 50 to 400 Hz.Power Consumption: 3 VA max.Output Signal: 4-20 mA DC into 900 ohms max.Zero & Span Adjustments:  Accessible via menus.Response Time: 250 ms (damping set to 1).Display: Backlit 4 digit LCD 0.4" height LED indicators for set point and alarm status.Electrical Connections: 15 pin male high density D-sub connection. 18" (46 cm) cable with 10 conductors included. 4' and 10' cables available.Process Connections:  1/8" female NPT. Side or back connections.Mounting Orientation: Mount unit in vertical plane.Size: 5" (127 mm) OD x 3-1/8" (79.38 mm).Weight:  1.75 lb (794 g).Agency Approvals: CE. 

Alat Ukur Tekanan Gas-A-300 Flat aluminum bracketFlat aluminum bracket for flush mounting Magnehelic® gage. 6.8" x 6.0" x .1", .35 lb.  

Alat Ukur Tekanan Gas-Magnehelic Differential Pressure Gage - Series 2230 0-30psiDifferential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standardSpecification:Service: Air and non-combustible, compatible gases. (Natural Gas option available.)Wetted Materials: Consult factory.Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.Accuracy: ±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).Pressure Limits: -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.Weight: 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g). 

Alat Ukur Tekanan Gas-Magnehelic Differential Pressure Gauge 0 - 1 PSIDifferential pressure gage, range 0-1 psi, minor divisions .02.Series 2000 Magnehelic® Differential Pressure Gage Indicate Positive, Negative or Differential, Accurate within 2%Specification:Service: Air and non-combustible, compatible gases. (Natural Gas option available.)Wetted Materials: Consult factory.Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.Accuracy: ±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).Pressure Limits: -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.Weight: 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g). 

Alat Ukur Tekanan Gas-Magnehelic Differential Pressure Gage- Series 2015Differential pressure gage, range 0-15" w.c., minor divisions .50.Series 2000 Magnehelic® Differential Pressure Gage Indicate Positive, Negative or Differential, Accurate within 2%Specification:Service: Air and non-combustible, compatible gases. (Natural Gas option available.)Wetted Materials: Consult factory.Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.Accuracy: ±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).Pressure Limits: -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.Weight: 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).